3 Simple Steps to Remove Flaking Paint from Your Exterior

Steps to Prepare the Exterior of Your Home for Painting

Painting the exterior of your house can be easy if you have the knowledge of how to properly prepare the surfaces. You don’t have to be an expert to obtain good results. All you need is the right exterior paint, the right painting equipment and the right preparation of the exterior surface. One of the most important jobs is preparing the exterior. For example, removing flaking paint . In fact, this task will likely take most of your time and effort. There’s no shortcut to it; you must do thorough preparation to get quality paint. A well prepared surface guarantees longevity of the paint job. Neglect it and you will need to repaint the surface year after year.

Here are simple steps to prepare the exterior of your home for painting

1. Firstly, clear all loose (flaking/peeling) paint

The first step in preparation is removing any loose paint. But how do you do this? Start by taking a scraper to scrape the entire painted surface, removing all the flaking & peeling paint. For paints that prove to be stubborn, apply extra pressure to get rid of it. However, be careful not to apply a lot of pressure to avoid gouging or damaging the surface you are scraping. Use a small scraper for the doors, windows and trim, and a wider one for sliding.

2. Use coarse sandpaper

It is advisable that you use 3M All Purpose sand paper to sand all surfaces until you feel they are smooth. To make the job successful, use a 3M sanding block holder when sanding larger areas. However, when preparing tight spaces and trim, use a sanding block as it will make your job easier and deliver great results. Ensure that the surface is as smooth as much as possible for better adhesion.

3. Use a orbital or power sander

Is the paint peeling starting from the outside wall? If so, you can scrape it off manually, but to eliminate even the minutest pieces of loose paint you need to use a DeWALT power sander. This helps you achieve smooth surfaces on hard to reach edges. Also, remember that if the paint applied is thick, you may need to use a sanding disk to get rid of it. Remove any marks from all the exterior surfaces before painting.

Now… preparing the exterior of your home for exterior house painting firms like St Louis Painters is very simple. The first thing before applying the paint. If you do not focus on the preparation and do a shoddy job, the results may not be as you expected. However, if you observe these tips and employ them, you will be extremely happy with the results.